Write us a Review
Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

SRAM Components

$151.00
- X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - New tooth profiles for improved wear - More durable finish - 94mm BCD
$43.00 - $151.00
- X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - Specially designed tooth profiles for improved wear - More durable finish - Bolt Circle Diameter (BCD): 107 BCD - Speeds: 12 - Material: Aluminum
$23.37 - $63.00
Original equipment on SRAM and Truvativ cranks, they also work well with other drivetrains. - 7000 series aluminum provides strength and durability - 130mm BCD
$47.00 - $59.00
Stainless steel rotor designed for smooth and quiet braking with any disc brake caliper.
$47.99 - $59.00
The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant. - Compatible with both road and mountain bike brakes - Rounded edges are UCI-compliant and allow for easier wheel installs - Hub interface: CenterLock - Rotor Type: Centerline
$41.00 - $54.00
The SRAM DUB bottom bracket series has a simple job— to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard
$43.00 - $54.00
Paceline disc brake rotors incorporate the elegant design of our eTap AXS road groupsets and feature a new brake track vent design for smooth, quiet braking performance. - Designed for road use - Paceline brake track offers quiet brake operation
$41.00 - $50.00
The SRAM DUB bottom bracket series has a simple job— to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard - Significantly lighter than GXP system
$42.99 - $50.00
SRAM's GXP Team PressFit MTB Bottom Bracket Cups are the premium choice for getting the most out of every pedal stroke. They feature smooth bearings that keep drag to a minimum and seals that keep debris out. Plus, these BB cups press directly into the frame without having to be threaded in for reduced weight and enhanced durability.
$45.00 - $50.00
Tall teeth with alternating tooth profiles hold the chain amazingly well and still provide space for mud to clear. - Full CNC Aluminum rings - Ring Position/Type: Chain Retaining Single Ring - Drivetrain Speeds: 10, 11 - Chainring BCD: 110 SRAM Asymmetric
$49.00
Get sharp, dependable X-Actuation shifting with SRAM's GX 2x11 Rear Trigger Shifter. This right-side rear shifter is compatible with SRAM’s 2x11-speed components, offering precise, swift shifting across their wide-range 11-speed cassette. • Dedicated 11-speed rear trigger shifter • Multi-position mounting • Discreet clamp • Aluminum pull lever • MatchMaker X compatible • Weight: 122 grams
$49.00
The GX Eagle shifters for the Eagle 1x12 drivetrains are high performance, moderately priced, and put total control of your gear selection in one hand. - Includes 2200mm cable - Updated SRAM twist mechanism for higher precision and increased durability - Rear Der/Shifter Compatibility: SRAM X-Actuation
$49.00
The GX Eagle Single Click shifter has been optimized for the specific demands of E-MTB, designed to help eliminate premature chain wear and chain breaking by limiting the pull lever to a single engagement. With Eagle Colorsystem, it comes in the GX master colorway to go with any cassette and chain color choice you might go with—from Black to Gold to Rainbow to all-new Copper. - E-MTB specific—limits the pull lever to a single engagement to help eliminate premature chain wear and chain breaking - Master GX Eagle group colorway to match all cassette and chain colors as part of Eagle Colorsystem
$49.00
Of all the components that make up a mountain bike drivetrain, the shifter doesn't exactly get a lot of spotlight time. But, as the rider's literal command and control center, the GX Eagle shifter is more than worthy of recognition. With intuitive thumb actuated triggers, the positive feel gives the right rider input to make shifts crisp and discernible every time. What's more, its already legendary reliability continues for all-day epics and all-time experiences. Plus, it features an aluminum trigger that's ready for inevitable punishment, as well as MatchMakerX compatibility. Precise and durable, it's the hard-working, no-compromise shifter keeping riders in the right gear, every ride. - Aluminum trigger designed for a positive lever feel - Master GX Eagle master colorway to match all cassette and chain colors as part of Eagle Colorsystem - Matchmaker compatible
$49.00
SRAM's Guide Hydraulic Line Kit is a replacement hose kit for all Guide brakes. - Compatible with SRAM Guide R, RS, RSC, and DB5 brakes - Length: 2000mm
$49.00
Original equipment hydraulic hoses for no-compromise brake performance. - Fits All B (2016+) Versions of Guide RSC RS R - Hose length: 2000mm
$49.00
Replacement line kit for SRAM and Avid hydraulic disc brakes. - For Level Ultimate/Level TLM (A1), 2018+ CODE R/RSC (B1) - 2000mm, black
$49.00
SRAM's RED 22 11-Speed Hollow Pin Chain features hollow pins for low weight, strength, and accurate shifting in all conditions. The heavily chamfeRED outer plates improve shifting and an inner plate finish provides longer chain life. And, with its great PowerLock connecting link, installation and removal is a snap.
$49.00
Original equipment rear derailleur pulleys for SRAM rear derailleurs. Fits X01, X01DH, X1, GX 1x11, NX, Force CX1, Force 1, Rival 1, Apex 1 Derailleurs. - Wide-narrow pulley tooth profile holds the chain better - Stainless steel sealed cartridge bearings
$49.00
SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete. - Finish: Black - Compatibility: SRAM RED eTap
$47.00
SRAM Force crank spiders are for repairing your crank or converting it to different gearing. Available in 110mm and 130mm BCDs.
$47.00
Get sharp, dependable X-Actuation shifting with SRAM's GX 2x11 Front Trigger Shifter. This left-side front shifter is compatible with SRAM’s GX 2x11-speed components (sold separately) and brings championship technology to everyone. • Dedicated 2-speed front trigger shifter • Multi-position mounting • Discreet clamp • Aluminum pull lever • MatchMaker X compatible • Weight: 122 grams
$47.00
SRAM's X5 9-Speed Rear Derailleur provides precise, dependable shifting along with long-term durability. Its aluminum construction keeps the weight down, while SRAM's 1:1 actuation ratio and direct cable routing provide quick, reliable shifts.
$46.00
The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard
$46.00
The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - For Super Boost+ cranks - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard
$46.00
The SRAM DUB bottom bracket series has a simple job—to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility. - Gutter Seal Technology drastically improves sealing against the elements - Sealed cartridge bearings - One oversized spindle to work across every bottom bracket standard
$46.00
The new SRAM DUB bottom bracket series has a simple job—connect your crankarms and protect the smooth, long-lasting application of power to your drivetrain. To allow that singular focus, we’ve engineered the DUB spindle to be the one true unifying component. One oversized spindle to work across every bottom bracket standard. For better crankarm compatibility. For better protection from the elements. For longer-lasting performance. To be stronger, smoother, simpler. Now, back to the ride. - One oversized spindle to work across every bottom bracket standard. - Significantly lighter than PFGXP system - Easier installation by allowing you to press the bearing cups into the frame - Easy installation - Two fully sealed cartridge bearings - ISO 4210 compliant. See Declaration of Conformity for details. - BB-frame interface PressFit (MTB: 89/92mm) - Crank-BB interface DUB - Bearing type Standard - Spindle diameter DUB - Cup material Steel
$46.00
The new SRAM DUB bottom bracket series has a simple job—connect your crankarms and protect the smooth, long-lasting application of power to your drivetrain. To allow that singular focus, we’ve engineered the DUB spindle to be the one true unifying component. One oversized spindle to work across every bottom bracket standard. For better crankarm compatibility. For better protection from the elements. For longer-lasting performance. To be stronger, smoother, simpler. Now, back to the ride. - One oversized spindle to work across every bottom bracket standard. - Significantly lighter than PFGXP system - Easier installation by allowing you to press the bearing cups into the frame - Easy installation - Two fully sealed cartridge bearings - ISO 4210 compliant. See Declaration of Conformity for details. - BB-frame interface PressFit (Road: 86.5mm) - Crank-BB interface DUB - Bearing type Standard - Spindle diameter DUB - Cup material Steel
$46.00
SRAM's GXP PressFit Road Bottom Bracket Cups are the premium choice for getting the most out of every pedal stroke. They feature smooth bearings that keep drag to a minimum and seals that keep debris out. Plus, these BB cups press directly into the frame without having to be threaded in for reduced weight and enhanced durability.
$46.00
SRAM’s 11-speed chain features heavily chamfered outer plates for improved shifting and quiet running. And, with its great PowerLock connecting link, installation and removal is a snap.
Page 1 of 6 Next page