Tires/Tubes

The Newton MTR (Mountain Rear), part of our ultimate tire package developed for gravity riding & racing. A tire that is at its best bringing up the rear while sprinting out the start hut of your race run, as you attack those loose off camber sections, hold the line on rocky chutes and pinballing down rock sections. Who Rides This Tire? Your bike of choice is a Downhill, Enduro or trail rig, you eat/sleep loose turns, berms and full-on terrain. Where Does This Tire Perform Best? Best suited to your rear wheel. A broad range of conditions from loose dust to wet loam. Most at home on Downhill & Enduro terrain, or rowdy trails. Go Faster, Go Bigger The tire, that small contact patch that connects you to the ground, is arguably the most important part of your bike. When you’re in the start hut, about to drop into your race run you need to know that this essential component is designed specifically with the job in mind. What better choice than the tire named after the man who defined the very laws of gravity. For Downhill, Enduro, and trail Dominance Drive focused tread delivers speed and durability with tracking performance that inspires confidence transitioning from straight-line to cornering across a wide range of conditions. Construction A dual-ply, robust 60TPI construction, the 2x60TPI casing combines no-compromise durability, while retaining traction and support over the most rugged terrain. Grip3 Compound Rear specific, triple density 40/50/60a compound, offering balanced levels of grip and treadwear. Protection DH:Wall – A butyl layer located within the casing ply, providing our highest level of sidewall defence.

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

Type: Patch Cement Size: Individual tube

Alloy air valve caps help prevent air loss

Bontrager's latest TLR sealant seals faster, lasts longer, and provides better air retention so you have a better tubeless experience with easier setup. The ammonia-free formula won't corrode rims or degrade tire rubber, and it provides permanent repair for punctures up to 6.5mm. Product details - Improved flat protection seals punctures faster - Increased air retention holds air longer with 3x less air loss than the original - Compatible with all TLR tires for use on road, gravel, and mountain bikes - Ammonia-free mixture won't corrode alloy rims or degrade tires - Effective in temperatures ranging from -5 to 120 degrees F (-21 to 49 degrees C) - Cool new blue color - Use with Bontrager TLR wheels, sealant, and rim strips for a complete tubeless system designed and tested to work together - Can be used in tubes to help seal punctures

- Plastic storage box - Contains 7 large patches cement, and scuffer

• Includes a plastic storage box, 6 patches, cement, and scuffer

The Product that Started a Tubeless Revolution Inside this simple bottle is a product that changed cycling. Today's tubeless systems rely on the lighter, more reliable, self-sealing performance of Stan's Tire Sealant. Just two ounces of Stan's in a converted standard tire or tubeless tire can repair punctures up to 1/4-inch almost instantly to keep you rolling. Longer-lasting Stan's Tire Sealant is formulated to stay liquid in tires with even thin casings for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart will convert up to 16 tires. - First choice of riders around the world for tubeless conversion and flat prevention - Seals punctures up to 1/4-inch (6.5mm) quickly - Stays liquid 2-7 months for long-lasting protection - Premium low-viscosity formula resists freezing to work in environments as cold as -30° F (-34° C) - Natural materials, safe for the environment - Can be injected through valve stems with removable cores compatible with tubes and tubular tires

Patch up punctures in your bike tires with Slime's peel and stick SKABS. No glue means no mess! These SKABS are quick and easy to apply, and come in a compact storage container. Just toss them into your bike bag. - Kit contains (6) pre-glued 1? patches and a scuffer.

- Anodized alloy construction - Fits standard Schrader valves

Specifically designed for the vulcanization of tube patches, valve patches, and rubber-based tube valve repair units.

- Forged alloy construction - Fits Schrader valves

Serfas replacement inner tubes are lightweight, durable, and affordable.

Serfas replacement inner tubes are lightweight, durable, and affordable.

- Snap-On high-Pressure plasticized nylon protects tube from abrasion - Older stock is yellow, New stock is black with halo logos

Self-sealing to keep you rolling Protect yourself from flats with these specially-designed Self-Sealing tubes that instantly seal small hole punctures. Premium-quality butyl rubber tubes feature a 0.9mm wall thickness for the perfect balance of weight savings and durability. Product details - 0.9mm wall thickness - 48mm valve length - Specifically engineered formula instantly seals small holes from puncture flats - 100% inspected for guaranteed quality 27-inch tire size equivalents - 700c x 23 – 25 also fits 27 x 7/8 – 1 - 700c x 28 – 32 also fits 27 x 1-1/8 – 1-1/4 - 700c x 35 – 44 also fits 27 x 1-3/8 – 1-3/4

Pack of 10 replacement tubeless plugs for the Tubeless Kit and Classic Tubeless Kit.

Odyssey's Air Supply tubes are specifically sized to fit modern BMX tires, and they are manufactured with a stronger emphasis on quality versus simply chasing the lowest possible price. On average, the Air Supply BMX tube retains air significantly longer than others currently available on the market. This is down to both the rubber that is used, and because of strict quality control during manufacturing. It is normal to assume that a “tube is a tube,” but a higher-quality tube will always last longer than a cheap tube during comparable everyday use.

Grab the right tube for your 700C tire, just choose the valve length and tube size! When it comes to valve length: - 40mm valves are ideal for 10mm—30mm deep rims. - 60mm valves are ideal for 30mm—50mm deep rims. - 80mm valves are ideal for 60mm deep rims. And for tube size: - Check your tire's sidewall to determine its size—then choose the tube whose range includes it! For example: a 700Cx28 tire will work with the 700Cx25-32 or 700Cx28-32 tubes.

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

- Valve type: Schrader - Valve core: Removable - Valve stem: Smooth - Butyl rubber - Wall thickness: 0.9mm

- Valve type: Schrader - Valve core: Removable - Valve stem: Smooth - Butyl rubber - Wall thickness: 0.9mm

- Valve Type: Presta - Valve Stem: Smooth - Valve Core: Non-Removable - Wall thickness: 0.9mm

- Butyl rubber - Removable valve core - Schrader valve - Wall thickness: 0.9mm

- Butyl rubber - Economy tube - Wall thickness: 0.9mm - Removable valve core

- Butyl rubber - Economy tube - Removable valve core - Wall thickness: 0.9mm

- Butyl rubber - Economy tube - Schrader valve - Removable valve core - Wall thickness: 0.9mm

- Premium alloy presta valve caps in an array of colors

- Shim adds support to Presta stem used in a Schrader rim

Compatible with all tubeless road, MTB and gravel tires. Refill packs with 10 repair plugs (5x thin and 5x thick).