Accessories

Wolf Tooth WT-1 Chain Lube is a synthetic lubricant and a chain treatment in the same bottle. As a synthetic chain lubricant, WT-1 will improve the mechanical efficiency of your drivetrain while lasting 3-5x longer than most other chain lubes. As a chain treatment, WT-1 will clean your chain by pushing dirt and debris to the surface where it can be wiped away. It will also protect your chain in all riding conditions, and allow you to ride longer between applications. - Cleans, lubricates, and protects chains - Peak performance in all conditions, wet and dry - Also works on other places of your bike, including hubs, cables, and jockey wheels

While we don't know about Gs one through nine, we can tell you that Dumonde Tech's G-10 Lubricant is something special. It is 100% biodegradable. By this, Dumonde doesn't mean that 51% of the lube is biodegradable, which often is enough for people to make a claim about their product. They mean 100%. That means the lube, the carrier, everything. There are no petroleum products in this lube. Only plant products. Bio-lube if you will. We can't say whether or not using G-10 will save the world. We can tell you that it is a step in the right direction. Lube comes off chains, get onto roads, trails, and eventually, can make it into the water table. We don't see any benefit to that. G-10 works like any other lube, albeit one with a nice citrus smell. Start with a clean chain. Dribble on the lube. Wipe off. Wipe again. Go. If it performs at all like other Dumonde lubes, it might even perform better after one or two bike washings. Because it is biodegradable, it might not last quite as long as Dumonde's Original and Lite lubes, but we found those lubes to be pretty long lasting. The Dumonde Tech G-10 lubricant comes in a recyclable drip bottle. The lube is colored green. - Developed from plant, vegetable and/or seed oil, rated as bio-based and Earth friendly - 100% bio-degradable - 100% plant based - Backed up with Dumonde Tech's proprietary technology - The products out-perform the competition and are safe for the environment - Your bicycle will have extreme protection, will allow you to ride longer, cleaner and more quietly

Our Classic LITE chain lube is a liquid plastic and through polymerization forms long-lasting plating on all chain surfaces. "Riding in" forms an extremely low-friction plating. Plating bonds to chain; can't be washed off! Components stay cleaner, last longer, and run quieter. Extremely durable and outlasts all other chain lubes! Environmentally sensitive and saves money. To be applied sparingly unlike many other lubes. Classic Lite and Original Bicycle Chain Lube (BCL) differ only in their concentration. Lite BCL is less concentrated for easier application and optimum performance. We recommend the Lite Bicycle Chain Lube for road bikes. You can confidently use Dumonde Tech's Bicycle Chain Lubes on all cables, pivots points, and seals. Safe on plastic, rubber and all seal materials. The product is designed to not harm your components. Eco-friendly and environmentally sensitive, our products are engineered to perform with minimal "carbon footprint" by not washing off in water, to use sparingly, lasts longer between applications, and your drive train lasts longer. Very good performer in extreme cold conditions.

After years of research and testing, Park Tool's built what they consider the best shop clamp made. It’s smooth, versatile and built to stand up to everyday shop use. • #100-3D fits the following repair stands: PRS-2, PRS-2 OS, PRS-2 OS-1, PRS-2 OS-2, PRS-3, PRS-3 OS, PRS-3 OS-1, PRS-3 OS-2, PRS-3.2-1, PRS-3.2-2, PRS-4, PRS-4 OS, PRS-4 OS-1, PRS-4OS-2, PRS-4W and PRS-33 • #100-5D fits PCS-4, PRS-7, some models of PRS-5 (with composite top tubes), and PCS-1 models manufacturer post 2002. (Note: Inspect top tube below lever for an embossed "939") • #100-25D fits PRS-25, PCS-10, PCS-11, PCS-12 (and PRS-15 with 1951-15 Adaptor Stud) • Grips nearly any tube from 7/8” to 3” (23–76mm), including aero tubes • Micro-adjustability allows perfect clamping pressure every time and prevents damage to thin-walled tubes • Long travel cam handle allows quick entry, adjustment and exit • Versatile: It grips nearly any tube including aero shaped tubing and seat posts 7/8” to 3” (23mm-76mm). Its narrow clamping jaws (2.7”/7cm) are designed to clamp securely yet fit into tight areas or on short seat posts. • Durable, replaceable jaw covers • Soft Touch saddle cradle provides a perfect spot to temporarily rest a bike by its saddle • Built to last: Powder coated, precision machined, die-cast aluminum main body parts and high quality small parts • Fast operation: Cam-actuated adjustment system for quick entry, adjustment and exit, plus handy “spinner” handle helps speed large size range adjustments

Durable polyester fabric make this pannier a long lasting touring companion. The waterproof roll closure ensures safe and waterproof storage of food and equipment. With its QL2.1 fixing it is quickly mounted and taken off the bike rack. A shoulder strap provides carrying comfort when taken off the rack. - Classical rear pannier (pair) with roll closure - Sides of PS 490 nylon material, front and back of PD 620 - QL2.1 system for racks up to 16 mm - 20 mm hook available as separate accessory (e.g. for e-bikes) - Including reduction pieces for tube diameters 8, 10 and 12 mm; with anti-scratch function reducing abrasions on rack - Top QL hooks and lower sliding hook adjustable without requiring any tools - Lower hook rail made of two-component "hard-soft" synthetic reduces abrasions on carrier - Including integrated inner pocket and shoulder strap - Can be used individually (e.g. for shopping, sports, picknick) - Can be combined with the ORTLIEB Rack-Pack size S or M - Highly reflective Scotchlite reflector - Easy to clean inside - Optional accessories: ORTLIEB carrying system, outer pockets (size S), mesh pocket, bottle cage, 20 mm QL2.1 hook, anti-theft device long - Note: In order to meet standard IP64 (6=dustproof, 4=protected against splash water coming from all directions) the closure must be rolled 3-4 times.

Incredibly compact set arrangement with many tools in a minimum of space. A completely new ratchet set feeling thanks to the unique textile boxes that are very robust and durable. They can be positioned upright for tidy storage on the workshop shelf. Additional surface protection due to textile outer material. Low weight and volume for simpler mobility. - Freely pivoting ratchet head with 5 predefined locking positions - Fine toothing with 72 teeth - Small return angle of only 5 degrees - Free-turning sleeve for high working speeds - Take-it-easy tool finder: color coding by size

The Klic Floor Pump effortlessly adapts to your needs with a magnetic quick-connect interface. The hidden hose with integrated gauge stores neatly away in the pump body when not in use, and can be used separately as a standalone tire pressure gauge. The optional burst tank installs or removes in seconds, and can be used either separately or integrated for installing and inflating tubeless tires with ease. - Burst tank can be pressurized to install and inflate tubeless tires - Tank is removable for easy transport - Hidden hose stores neatly in the body of the pump

- Full chromoly construction specifically designed for 700c bicycles - Mounts to hub axle for universal fitment - Adjustable height with lower horizontal strut for fitment of a small bag or pannier - Deck provides ample cargo space at 14.25"X12" - Optional stylish fence available separately

Our classic model—on the road around the world since 1988. This model is the basis for all of our rear carriers. CARGO has been tested and loved by its owners in tough daily routine since 30 years. CARGO is our all-round happy solution for transporting luggage on the bike. CARGO is good for your daily ride or as packhorse for your next world tour. It fits most bikes and carries most panniers. - Material: 25CrMo4 - Weight: 740 g | 26.1 oz (28'') - Loading Capacity: 26 kg (tested with 40 kg | 88 lbs) - Diameter: 10 mm | 0.4 in

The most tried and tested all-round carrier updated for today’s challenges: 3D feet with perfect force absorption and integrated screw attachment. Comfortable mounting parts for mounting the stays to the frame. Including protection of tail light. If required, a spring clamp can be clicked onto the carrier. Armed for the next tour. - Material: 25CrMo4 - Weight: 780 g | 27.5 oz (28'') - Loading Capacity: 26 kg | 57.3 lbs (tested with 40 kg | 88 lbs*) - 10 mm | 0.4 in

The sturdy Lowrider by Tubus – now also in stainless steel! Highly durable, resistant to rust and can be positioned flexibly. An indestructible, uncomplicated travel companion in an elegant style! - Stainless steel version - Elegant style thanks to polished surface - Indestructible - Matches the appearance of the bike beautifully - Approved for 18 kg | 39.7 lbs - With lamp holder - Size: 26"/28" - Weight: 500g/17.6-ounce - Diameter: 14/10mm | 0.6/0.4-ounce

Make ride time family time with Sunlite's Deluxe Child Carrier. It attaches to a sturdy aluminum rack and cradles your most precious cargo with a durable, high-impact plastic structure. Your bundle of joy rides in complete comfort with a 3-point safety harness with protective chest pad, adjustable foot wells with straps, a grab bar with padded grips and a head rest. And it's got real-world details like 2 in-seat storage compartments and a washable, padded seat for junior.

The SmartphoneHub transforms your bike into a fully networked eBike. The smartphone and COBI.Bike app turn the SmartphoneHub into an intelligent control center that can be used for navigation, recording activities, and connection to other. The eBike can also be ridden without a smartphone due to the integrated display in the SmartphoneHub, showing the most important riding data. - The SmartphoneHub and the COBI.Bike app connect the eBike to the digital world and allow for navigation, music streaming, fitness tracking, and integration of other services and apps such as Strava - A 1.52-inch display allowing for use without a smartphone - The COBI.Bike app gives eBikers a permanent overview of the most important training data. such as performance, cadence and calorie consumption - The COBI.Bike app allows access to music and audiobook streaming services, such as Spotify or Audible, which can be operated by remote control - The SmartphoneHub charges phones using the eBike battery - Walk assistance function helps you push your eBike at speeds of up to 6 mph

Service tools to ensure long-term success of Chris King hubs. - For intensive servicing of Ringdrive system found in most Chris King rear hubs - Included: Hub Cone Adjusting Tool, Cog Spline Wrench, Spline Driver, Driveshell Bushing Tool, and Service Manual - Does not fit R-45 model hubs. See TL7829 for proper tool fitting R-45 hubs

- Set includes 8-19mm wrenches - 12 point dual pawl ratchet for better contact - Ratchet lever on wrench is easily accessible for direction changes - Supertorque corners on open end provides extra turning power - High polished chrome finish is durable and cleans easily - Includes plastic storage tray

Park's Dial Indicator Gauge Set mounts to their TS-2 or TS-2.2 Truing Stand (sold separately). The set makes it easy to view and correct a wheel's lateral and radial run-out within a tolerance of .01mm. Compared to going by the gap between the truing stand pointer and rim, having gauges that put a number on the clearance makes wheel truing easier and more accurate.

Looking for the security of a U-Lock but the flexibility of a chain? Look no further than the Bordo Granit X-Plus 6500. With an ABUS security rating of 15 out of 15, this lock features temper hardened steel bars encased in an extra soft coating to protect your bike's paint job. The ABUS Link Protection Shield offers high protection from sawing of the links. The lock body, links and supporting elements of the locking system use the same high quality steel you'll find in the bars. The patented X-Plus Key cylinder offers extremely high protection from picking and it can be keyed alike with other ABUS locks featuring the same X-Plus cylinder - very convenient for multi-lock and multi-bike households. Like all locks in the Bordo family, the 6500 is simple to carry. The rattle free lock carrying case attaches easily to the frame via the silicone coated non-slip Velcro straps or screws easily into the bottle-cage mounts. - 5.5mm steel bars - Bars, links, and lock body are made of special hardened steel - Soft-touch coating on the bars and matching silicone lock body cover protects bike's paint job - ABUS X-Plus Cylinder offers extremely high protection against picking - Two keys supplied with the lock, one LED lighted - ABUS Code Card for ordering additional or replacement keys - Compact, versatile folding technology offers greater range of locking options - Length: 110cm

We went through extra steps to make this tool half precision measuring instrument and half pry bar. - Tolerances as tight as a quarter of a thousandth of an inch (.0063mm) in some critical dimensions of this tool. - Ability to lock in the feeler so you don't have to second-guess your measurement after bumping it on the tire. - Top half of tool will rotate out of the way of fender stays and frame tubes. - Feeler gauge stick stores inside the top half of the tool, very handy for the traveling mechanic. - T-bolt extends past the tool for access to those problematic hangers found on some modern full suspension bikes. - Compact at just under 11" ( 28cm) - Re-buildable - While ideally your HAG should be sent back for a rebuild, it is possible to do them in the field by replacing the brass bushing in the T-Bolt. - Compatible with the three most common wheel sizes (26, 27.5/650B, and 700/29)

The Zeitgeist Pack is an excellent choice for gravel adventures, touring, bikepacking and everyday bicycle commuting. Our design puts 12L of carrying capacity right at the helm of your bicycle and features two handy side-pockets that collapse flat when not in use. The Zeitgeist Pack is made out of Challenge ECOPAK 100% recycled polyester and contains roughly 15 plastic bottles rescued from ocean beaches. Features: - Challenge Sailcloth recycled polyester bag cloth rip stop (450D) - Flap lined with TPU coated 70D nylon ripstop for excellent water resistance - 400 D Packcloth Lining throughout the body - HDPE insert in body to help shape and stabilize your load - Interior features one-handed drawcord closure with additional compression strap to compact your load. - Flap features webbing daisy chains and D rings for additional lash points - Reflective detailing - Side pockets collapse flat when not in use - Comes with foam spacers and 9" Swift Straps - Redwood EPLX400 interior cinch closure Features Cyberian Cordlock One handed Open & Close cinch. - Made in Surabaya, Indonesia out of recycled materials Dimensions: - Measurements: 18"w X 9"h X 7"d - Width of the Zeitgeist with pockets folded: 13" - Width of the Zeitgeist Pack with side pockets packed out: 19" - Capacity: 12 Liters - Weight: 1.3 lbs Measurements and Fit: - Without a rack: When packed to the gills and under-weight, the Zeitgeist Pack plays nice with bikes that have a minimum of 11" from the center of the handlebars/saddle loops to the top of the tire or fender. - With a rack: As little as 7.5" of clearance is required to run the Zeitgeist Pack on either a front rack or the rear

In conjunction with the EPS Power Unit, the Interface is the "thinking" center of EPS and is responsible for on board diagnostics, managing settings, converting analog signal from Ergo Levers to digital and sending it on to the Power Unit maintaining a dialogue with the Power Unit. - Has been updated to work with 12-speed cassette sprockets - The V4 version enables automatic shifting once a set gear inch ratio has been reached following the gear change - Wireless system to communicate with the MyCampy app via pc / notebook / tablet / smartphone (BTLE), allowing the user of the EPS groupset to personalize settings - 500mm cable length to Ergopower controls - 550mm cable length to EPS V4 power unit

Meet the new fail-safe for your tailgate, featuring padded protection for your most prized possession. With durable PVC tarpaulin and a micro-brushed inner lining, the FOX Overland pad is designed to keep your truck and bikes clean and secure. - Raised bumpers (reinforced with high-density foam) keep down tubes secured in place to minimize frame contact - Each pad comes with two strap extenders for eMTBs - Fully adjustable rear opening to maintain function of your backup camera and keep your tailgate handle accessible at all times - Durable PVC tarpaulin on the outside and a micro-brushed inner lining ensure your tailgate is protected from cosmetic damage - Every size of Overland features cinch straps to adjust the exact height and width of your truck’s tailgate

Enduro trail riding to gravel adventure or backcountry powder mission, the Smith Bobcat sunglasses are for riders and skiers who want the full coverage of the Wildcat with a smaller fit and a lightweight feel. This hybrid design pairs goggle-like coverage with the airflow and easy-wear feel of sunglasses. ChromaPop brings out the details on forested trails and in bright alpine bowls. The lens is interchangeable, and a bonus clear lens is included for low-light needs. No-slip fit details keeps them in place through rocky terrain and high-speed descents. Vision - ChromaPop lenses enhance contrast and natural color to make the details pop - Interchangeable lenses Fit / Integration - Small to medium fit, large coverage - 5-base lens curvature - Slight wraparound fit - Megol temples and nose pads provide non-slip grip so glasses stay put - Two-position adjustable Megol nose pads Frame - Evolve bio-based frame material is lightweight and durable - AutoLock hinges hold frames open for easy one-hand on and off - Strategic venting increases airflow for reduced fogging and maximum clarity

How did cyclists in the '80s even see around those big, bulky frames? We've come a long way since the days of leather chamois and crumbly energy bars. The Smith Reverb performance sunglasses have a modern, 27-gram shield for a panoramic view without the weight of bigger glasses. The PivLock™ design lets you easily swap between two interchangeable ChromaPop™ lenses. No-slip nose and temple pads keep your glasses right where you need them around every blind corner and up every brutal climb. Product Details: Vision - ChromaPop™ lenses enhance contrast and natural color to make the details pop - Smudge and moisture resistant coating for easy cleaning and clear optics - 100% UV protection Fit / Integration - Medium fit, medium coverage - 7x4 toric lens curvature - Megol temple and nose pads provide nonslip grip so glasses stay put - Two-position adjustable nose pads - AutoLock hinges hold frames open for easy one-hand on and off - Compatible with our optical docking system (ODS4) prescription lens insert Frame - Lightweight, flexible and durable TR90 frame - PivLock™ interchangeable lens system makes lens changes easy What's Included - Bonus ChromaPop™ Contrast Rose lens - Performance hard case - Microfiber bag

Long runs, hot laps on the mountain bike or a fast-paced road ride, a clear view of the rocks, roots and terrain ahead is essential. You can count on the Smith Vert PivLock™ sunglasses for a distraction-free feel and a widescreen view that lets you get in the zone whether you’re letting it rip downhill or measuring your effort on a climb. Their cylindrical shield lens and rimless design make for an ultralight, low-profile fit and unobstructed vision. The PivLock™ design lets you easily swap between the ChromaPop™ lens and the bonus clear lens to match the light conditions. Non-slip nose and temple pads keep the Vert right where you need them down high-speed descents and across rough terrain. Vision - ChromaPop™ lenses enhance contrast and natural color to make the details pop - Smudge and moisture resistant coating for easy cleaning and clear optics - Medium to large fit, large coverage Fit / Integration - 6-base cylindrical shield lens curvature - Slight wraparound fit - Megol temple and nose pads provide non-slip grip so glasses stay put - Two-position, adjustable Megol nose pads - AutoLock hinges hold frames open for easy one-hand on and off Frame - High impact resistant TR90 nylon frame - The PivLock™ interchangeable lens system makes lens changes easy

Ladders, log rides and challenging drops, the Smith Wildcat is for riders who go big but don't need to look the part. A versatile, hybrid design, this pair has the protection and coverage of goggles with the airflow and easy-to-wear style of sunglasses. Take on exposed trails or dark, wooded jumps with the included bright-light ChromaPop™ lens, or secondary clear lens. The no-slip fit of the nose and temples will keep the Wildcat in place through every new challenge. Product Details: Vision - ChromaPop™ lenses enhance contrast and natural color to make the details pop - Smudge and moisture-resistant coating for easy cleaning and clear optics - 100% UV protection Fit / Integration - Medium fit, extra-large coverage - 5-base cylindrical lens - Two-position adjustable nose pads - Megol temple and nose pads provide a non-slip grip so glasses stay put Frame - Hybrid TR90 and TPU frame - AutoLock hinges hold frames open for easy one-hand on-and-off What's Included - Bonus clear lens - Performance case - Microfiber bag with internal sleeve

Park Tool has long provided some of the best cutting and machining tools in the bicycle industry. Their 690 Cutting Facers reflect their commitment to maintaining this high level of quality. Please read below for use and compatibility information specific to each size cutter: - 45mm (690): The 690 cutting facer is used on the HTR-1, HTR-1B, BFS-1, and BTS-1 cutting and facing tools. The facer has an outside diameter of approximately 45mm. - 57mm (690XL): The 690-XL is a larger version of the 690 facer for the HTR-1 Head Tube Reamer and Facer. It has a nominal outside diameter of 57mm. It may be used in conjunction with the 788 reamer. It is also used with the 767 Pilot or the 768 Pilot to face only the large diameter headtubes used with, "low profile," ZS-type headsets. - 65mm (690-XXL): The 690-XXL faces large headtubes. It has a nominal outside diameter of 65mm. Use the 690-XXL facer with the 750.2 Centering Cone Adaptor and 789 Reamer or 790 Pilot when facing head tubes with internal diameters of 55.95–55.90mm.

Both kids and parents will love Topeak's BabySeat II. It's suspended to provide little ones with an extra-plush ride and it boasts important safety features, such as adjustable foot rests and safety straps, a quick-release padded safety bar, a 4-way safety harness, and dual safety latches that lock the seat to the included rack.

The king has returned to rule! The new JoeBlow Ace DX features an innovative three-stage design that achieves both high pressures and high volume in record time. Stage one opens both barrels for big volume to reach 60 psi with 30% less effort than standard floor pumps. Stage two uses the main barrel only for pressures up to 120 psi while stage three engages the small barrel to achieve an amazing 260 psi. Two tone padded handles, wide stable base and new 4” base mounted analog gauge make inflation easy. The new SmartHead DX1 automatically adjusts to fit Presta and Schrader valves without swapping parts and the lower profile air release button makes getting the right pressure easy. Includes ball and air bladder type inflation needles. - SmartHead DX1 full metal pump head w/ air release button & x-long hose - Gauge: 260 psi / 18 bar; 4” base mount analog - Base: Aluminum/Rubber - Barrel: Anodized aluminum - Handle: Oversize dual tone - Weight: 2.45 kg / 5.4 lb - Size: 74 x 28 x 22 cm/29.1” x 11” x 8.7”

In keeping with its commitment to innovation, Ortlieb has just introduced another PVC-free line of products made of a polyurethane-coated polyester fabric. The base fabric of the products in the Free Line is coated with polyurethane in a manner that ensures lasting waterproof qualities. The result is a waterproof and durable canvas material that is as outstanding as the conventional Ortlieb canvas material when it comes to durability and service life. The PVC-free version of the proven Ortlieb Back-Roller was developed for cyclists and outdoor enthusiasts who would like to avoid PVC entirely. This rear pannier bag with a roll closure offers ultimate practicality for all of your bike tours and weekly grocery-shopping ventures, especially on account of its generous payload. Thanks to its waterproof exterior, easy-to-clean interior and shoulder-bag function, the Back-Roller Free is ideal for all who would like to use their bikes despite having things to carry. With the Quick-Lock2.1 system, the bags attach to any bike rack with a tube diameter of up to 16 mm. Larger hooks (e.g. for e-bikes) are available separately. - Classical rear pannier (pair) with roll closure - Made of PVC-free, PU-laminated polyester fabric - QL2.1 system for racks up to 16 mm - 20 mm hook available as separate accessory (e.g. for e-bikes) - Including reduction pieces for tube diameters 8, 10 and 12 mm; with anti-scratch function reducing abrasions on rack - Top QL hooks and lower sliding hook adjustable without requiring any tools - Lower hook rail made of two-component "hard-soft" synthetic reduces abrasions on carrier - Including integrated inner pocket and shoulder strap - Can be used individually (e.g. for shopping, sports, picnic) - Can be combined on the rack with Ortlieb Rack-Pack size 24L or 31L - Simultaneous use of Ortlieb Travel-Biker possible - Highly reflective Scotchlite reflector - Easy to clean inside

The COSMO is the flagship model for stainless steel Tubus carriers. It has a wider cargo area, extreme carrying capacity, and a longer back for better tail light protection. - Weight: 680g or 24 oz. - Load Capacity is 40kg or 88 lbs. - Wheel size 26? or 700c