Parts & Accessories

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Three slots for additional adjustments over the B-RAD 2 base - Compatible with triple bottle mounts on forks or frames, use neoprene pad and zip tie for use with standard bottle cage mounts

For BabySeat II Racks and MTX Tubular Racks (34.5 cm in length for small bike frames). - If you have a small frame bike and cannot install Topeak rack or BabySeat in recommended position (2 or 3 degrees from horizontal), please use the 34.5cm extra long mounting bracket arm for proper installation.

- Fits Sunlite 4506/45119 alloy racks

Meet the new fail-safe for your tailgate, featuring padded protection for your most prized possession. With durable PVC tarpaulin and a micro-brushed inner lining, the FOX Overland pad is designed to keep your truck and bikes clean and secure. - Raised bumpers (reinforced with high-density foam) keep down tubes secured in place to minimize frame contact - Each pad comes with two strap extenders for eMTBs - Fully adjustable rear opening to maintain function of your backup camera and keep your tailgate handle accessible at all times - Durable PVC tarpaulin on the outside and a micro-brushed inner lining ensure your tailgate is protected from cosmetic damage - Every size of Overland features cinch straps to adjust the exact height and width of your truck’s tailgate - Full-size (up to 6 bikes) - for Full Size Trucks (F-150 to F-350, 1500 - 3500 series, Tundra and Titan)

Electra's Seatpost Clamp w/Rack Mounts is the crucial link between your bike and your rear rack. It replaces the standard seatpost clamp to allow rack installation on bikes not originally fitted with rack eyelets.

An adapter plate that easily mounts to many trunk bags to add the versatility of the MIK rack and bag system. Add the versatility of MIK to your bags and racks The adapter plate mounts to bike trunk bags with 10cm-wide rack mounting slots, bringing the benefits of the MIK system to your standard bike bag. When you add this adapter, you'll be able to secure bags to your MIK-compatible rack to help deter theft, while ensuring it's still easy for you to remove them when you need to. Hardware included. Product details - Adapter plate adds MIK compatibility to trunk bags and baskets - Easily mounts to bags with 10cm-wide rack mounting slots - Compatible with most Electra bags - Securely mounts with just four bolts

A carrier plate that easily mounts to most racks to add the versatility of the MIK rack and bag system. Add versatility to your rack with MIK The adjustable-width MIK (Mounting Is Key) Carrier Plate mounts easily to most racks, giving you all the benefits of MIK's unique keyed install system. This adapter allows you to secure MIK-compatible bags to your rack to help deter theft while ensuring it's still easy for you to remove them when you need to. Hardware included. Product details - Adds MIK compatibility to traditional bike racks - Securely mounts with just four bolts - Adjustable mounting width from 100mm to 170mm to fit most racks

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm - Designed to maximize bottle capacity on small frame bikes and dual suspension frames

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Long, four-slotted mount allows two, smaller bottles to be mounted in-line - Compatible with triple bottle mounts on forks or frames, use included neoprene pad and zip tie for use with standard bottle cage mounts

The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options. - Mounts to bottle bosses, or to the B-Rad base for additional carrying options - Main strap is 50mm wide and holds loads 75-120mm diameter (3 - 4.75 inches) - Cradle strap is 40mm wide and 350mm long for supporting loads

B-RAD Bottle Mounts allow for cargo customization and cargo optimization. They are designed to work in tandem with B-RAD Base mounts to keep cargo on the bike and off the back. - Compatible with any bike frame that has 2 standard 64mm spacing bottle cage mounts (most modern frames) - 6061-T6 aluminum brackets, stainless hardware - Weight (no hardware) – 20g - Maximum load 1700g - Designed to carry two bottles or accessories off of one B-RAD base

The B-RAD pump bag protects your frame pump from water and dirt ensuring it is working when you need it. - Mounts to the B-RAD system or on its own - Dimensions: 12 in x 2.5 in x 2.5 in (30 cm x 6.5 cm x 6.5 cm)

Replacement hardware, bolts and nuts for Wald baskets. Works with Wald Basket models: 520, 520GB, 535 and 535GB

By using the accessory bolt mounts on a frame or fork, the Wald Standoff kit allows the user to space a basket or rack away from other components that would otherwise be in the way, like disc brake calipers. - 2 Phillips head frame bolts in 1.5-inch (38mm) length - 2 Standoff spacers in 1-inch (25.4mm) length

Common on European utility bikes, a front wheel stabilizer makes loading front racks simpler. It is a spring connecting the fork to the down tube. It adds a subtle self centering action to the front wheel, making loading and unloading of a bike with a basket, or say, our Porteur Rack much easier. The spring also offers some resistance to steering, so it counteracts deflections from hitting potholes and road debris. - Mounts to the back of the fork crown via brake bolt or through bolt - Fork crown mount diameter is made to fit an M6 bolt - common on nutted calipers - Use Sheldon's Fender Nuts to work with recessed brake bolts - Rust resistant and includes all required brackets and hardware - Available for Small (31.8mm and smaller) and Large (38-62mm) sized downtubes

Bolt-on eyelet for use with Tubus Lowrider racks and bags requiring bungee hook attachment.

LM-1 Fork Adapter for rigid forks* with a diameter from 20mm up to 32mm. For all Tubus Lowriders except for Duo. *Please Note: Do NOT mount on suspension forks!

LM-BF 35 Fork Adapter, for forks without eyelets. Use with rigid forks* with a diameter from 25mm up to 40mm. For all Tubus lowriders except for Duo. *Please Note: Do NOT mount on suspension forks!

Replacement stays for a variety of Tubus racks. Every roundstay is made out of solid aluminum, and they are available in various lengths and offsets. - 8mm diameter stay - Drilled for M5 bolts

Topeak's Cargo Net works with the Trolley Tote or MTX Rear Basket (sold separately). Make sure your goods stay in place on those bumpy rides home!

Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.

QuickClick mount for racing type saddles. Works with all Topeak Wedge Bags. - Material : Injected Nylon - Weight: 30g / 1.06 oz

Topeak's front basket handlebar fixer fits standard bikes or eBikes with display units. - Fits up to 1-inch handlebars

Adapter for mounting the Topeak MTX rear basket to any MTX QuickTrack compatible rack.

Fast and easy attachment of Topeak handlebar bags. - Clamp: Fits 25.4/28.6/31.8 mm Handlebars (shims included)

Omni QuickTrack Adapter attaches to a standard rear rack or Racktime* system platform allowing the use of popular Topeak TrunkBags and rear baskets. Adjustable mounting brackets fit rear rack widths from 90mm to 120mm with 10mm to 12mm rack tube dimensions. - Attachments: Rear rack deck - Material: Engineering grade polymer - Max Load: Limited to rack max loading rating - Size: 32 x 9.4 x 6.1cm - Weight: 230g / 8.11oz Compatibility - Fits rear rack without top plate and spring clip, - Rear rack width 90mm - 120mm, - Rack tubes, 10mm to 12mm diameter - Compatible with Topeak MTX / RX TrunkBags and MTX rear baskets *Racktime is a registered trademark of tubus carrier systems GmbH.

Take your bike adventures even further with a versatile mount cage to pack larger gear on your bike. The included tie-down straps provide the ability to carry a DryBag, sleeping bag/pad, stuff sack, or any round shaped gear on your bike frame or fork with bottle bosses. A four-hole mount design offers height adjustment of your load for better balance. VersaMount clamps also provide easy installation and flexible mounting options. - Fits tubes 20-60mm. - Engineering grade polymer - 64 mm mounting height adjustable - Weight: 128g - Max load: 3kg / 6.61lb - Dimensions: 22 x 12 x 7cm / 8.7 x 4.7 x 2.8-inches

Thule's Pack n' Pedal Side Frames mount quickly and easily to the sides of their Pack 'n Pedal Tour Rack (sold separately). They allow you to use any model of pannier for increased luggage capacity and a lower center of gravity.

Allows Thule Yepp Maxi to be installed on a bike with a rear rack with a load capacity of at least 35 kg/78 lbs and the ability to carry seat and bike bags. Features: - Fits rear racks measuring 11-17cm/4.5-6.7" - For use on rear racks with a load capacity of at least 35kg/78lbs

The Bungee Booster is a quick and easy way to add some extra capacity (as well as some color) to any of our bags with parallel webbing daisy chains. Just lace the durable elastic cord through the loops of the daisy chain and slip the cord lock on for adjustability. Cut to length to fit whatever bag you choose.

The Rando Pocket is an accessory bag fit to carry a small repair kit, wallet, keys, a cell phone, or a small point-and-shoot camera. Designed as the perfect match for our most revered bicycle bags, the Rando Pocket attaches to our Kestrel Handlebar Bag, Ardea Pack, and Anchor Hip Pack, and mounts to the Wald 137 Front Basket to upgrade any kit. The Rando Pocket is made out of Challenge ECOPAK 100% recycled polyester and contains roughly 1 plastic bottle rescued from ocean beaches. Add versatility to your favorite set-up: The Rando Pocket weaves securely onto the Wald 137 Basket using standard MOLLE attachment and feeds onto our Kestrel Handlebar Bag, Anchor Hip Pack, and Ardea Pack to add space for your small belongings. The Rando Pocket is padded to protect your point-and-shoot camera and is the ideal pouch to keep repair supplies at arm's reach. Because the attachment mechanism is universal to the MOLLE system, our Rando Pocket is the perfect addition to any bag that features MOLLE webbing. Cool Features: - MOLLE attachment - Single-handed closure - Fully padded with closed-cell foam Attaches to the following bicycle bags: - Kestrel Handlebar Bag - Ardea Pack - Merlin Randonneur Bag - Anchor Hip Pack Dimensions: - Measurements: 5.25"h X 4"d - Capacity: .8L - Weight: 2oz Built with: - Recycled ECOPAK™ EPLX400 - Packcloth - Closed Cell Foam - Nylon Webbing

Extend the life of your Dummy bags with this replaceable wear patch.

Surly's Dummy Deck provides a light, durable platform for cargo bikes, built to Xtracycle's Longtail standard — including the Big Dummy, of course. The Dummy Deck is stamped from 4mm-thick aluminum, chosen for its strength, durability, and recyclability, and it bolts directly to Surly Dummy Rails to stiffen and stabilize the whole system (it's also compatible with Xtracycle V-racks by using Xtracycle's SuperHooks). It features cut-outs for routing straps and cordage, a mounting hole for a rear light bracket, accessory-mounting holes, and countersunk holes for SuperHook hardware.

Surly's Dummy Rail Collars are nothing more than a simple clamping device that buttresses the connection between your Big Dummy Frame and the Dummy Rails. They increase the stiffness of the interface of these two parts and help keep your cargo from getting its salad tossed… unless of course your Dummy Bags are filled with tossed salad. These are designed specifically for use with the Big Dummy frame and Dummy rails, and will not work with Xtracycle rails. WARNING: Properly installed Dummy Rail Collars are required for carrying live cargo on your Big Dummy.

Spruce-up a well-loved Dummy bag with replacement parts from Surly.

Spruce-up a well-loved Dummy bag with replacement parts from Surly.

Spruce-up a well-loved Dummy bag with replacement parts from Surly.

Spruce-up a well-loved Dummy bag with replacement parts from Surly.

Surly Front Rack Hardware

Surly's Junk Straps are basically really long toe straps. They're 120cm woven nylon with a stainless steel buckle. Surly had them made to specification to ensure that they work well and last a long time. They're easy to use and they stay tight. Once you're ready, loosening them is quick and easy. They're light, pack small, and securely and conveniently attach all kinds of stuff to your rack, basket, handlebar, backpack, under your seat, around your thigh…just about anyplace. You can combine them for even longer straps. - Pack of 6

The Loop Junk Strap is the same 120cm woven nylon strap with a stainless steel buckle that Surly's regular junk strap is. The Loop Style Junk Strap, however, has a loop sewn at each end of the strap so you can wrap them around small diameter tubing like that used for racks and handlebars. They secure in the middle with the stainless steel buckle. Surly made these Loop Style Junk Straps because it offers another method for those wanting to secure cargo to their racks and or bikes. Junk Straps of any kind are useful in many different situations so toss a few in your backpack and always be ready to tie something to anything else. - For general tie down use - 42" loop strap, plus 8" closure buckle strap

All the hardware for the lower portion of your Surly rear rack. Stainless steel.

Suitable as a tourniquet or stylish headband in a pinch, the Whip Lash's primary function is to help you attach whatever needs attaching to your bicycle frame. Available in a multi-pack that includes two 550mm lashes and one 695mm lash, the Whip Lash's potential is limited only by your imagination. You could use one to strap your beverage to the down tube when the trail says you ought to keep your hands on the bars. Or you could use another to fix your fishing gear to the top tube when rack space is maxed out. Whatever you get into on or off the bike, they're handy to have around because they're light, compact, and easy to use. Rubberized on one side to keep your stuff from slipping around, the Whip Lash's trimmable design features nylon construction and a simple hook-and-loop style closure.

- Replacement parts for Bkbrn Type SGL bike racks - Sold as a set

Are you trying to carry an oddly-shaped item on your rack? Sunlite's Bungee Cargo Net will secure it for the ride home. It is 13 x 13 inches in size and the 4 vinyl coated hooks help secure it to your rack.

- Mesh style design with a durable powder coated finish - Fully adjustable aluminum and composite quick release bracket - Handlebar mount

- Bike rack RR 290 mm strut kit with hardware - Great for smaller frames - 4 bolts & nuts - 1 set/bag

- Hardware included - Fits all Sunlite Gold-Tec racks - Cut to length

• Vinyl coated hooks • 9 mm diameter • Black

- All-weather polypropylene basket - Fully adjustable aluminum and composite quick-release bracket - Handlebar mount is compatible with 22.2mm and 31.8mm handlebars

- Replacement/Additional rod holders for use with the Sunlite Ramblin Rod Holder Racks - Adds an additional rod holder for a total of 2 per rack - Not compatible with standard racks - Type: Add on Color: Black - Compatibility: Sunlite Ramblin Rod Racks

The Proviz REFLECT360 pannier cover is adjustable and designed to fit over all standard size panniers (up to 25L capacity). The Proviz REFLECT360 pannier cover, like the whole of the REFLECT360 range, is manufactured from CE EN 20471 certified material. The pannier cover is dual-layered to give you unparalleled water-resistance and is made from 100% reflective material to help your position be more easily identified on the road. The Proviz REFLECT360 pannier cover is attached securely using elasticized cords and press-stud fasteners. The edges of the cover are elasticized to create a secure fit around your pannier. A light loop can also be used for those wishing to attach an extra LED light. About the fabric: The fabric used for the REFLECT360 range is highly technical. During daylight, it is a modest grey color. At night, when the fabric picks up an external light source, e.g. vehicle headlights, it gives "astonishing reflectivity" (quote: Cycling Active Magazine Sep:2014). The material is CE EN 20471 certified. - Made from 100% reflective material—CE EN 20471 certified - Dual-layer 100% waterproofing - Easily fitted to most panniers up to 25L in size - Elasticized edge, straps, and press-stud fasteners - Light loop (to add LED light)

The PDW Outpost Mount allows you to attach a handlebar-mounted headlight to the side of your tapered wire basket—eliminating the problem of basket cargo blocking the light beam. The attachment plate compensates for the angle of a tapered wire basket, allowing the headlight to stay nice and level. - 32mm diameter clamping area for lights - Attaches with two M5 bolts and a steel backing plate - Mounts on left or right side

What should you do with all those small, but important extras on your bikepacking tour? The best place to put your snacks, smartphone, rain slicker, and other items is in your ORTLIEB Accessory-Pack. This convenient volume expander for your Handlebar-Pack keeps your things secure, absolutely waterproof, and quickly accessible at all times. Use the metal hooks to securely attach the Accessory-Pack to the four points of attachment on the Handlebar-Pack. And if you don't plan on spending the night outdoors and don't need your Handlebar-Pack, you can still use your Accessory-Pack as a handlebar bag thanks to its pre-mounted Velcro straps. You can even use the carrying strap to transform the lightweight bag into a shoulder or hip bag.

If you use an ORTLIEB Back-Roller, Bike-Packer, or Velo-Shopper for your ride to work, you may want to consider the advantages of the Commuter Insert. You pack the Commuter Insert at home – with your laptop, lunchbox, documents, water bottle, pens, smartphone, change of shoes, etc. – and then simply insert it into your pannier. The advantage is that everything stays well-organized, nothing goes mysteriously missing and nothing hides in the depths of your bag. And so you save time and avoid those nervous moments of uncertainty. While the Commuter Insert is ideal for commuters, it can also be a faithful companion to anyone who transports gear from any point A to any point B. The Commuter Insert is made of lightweight, durable nylon fabric. A padded compartment for your laptop or tablet is located directly under the handle. There is a separate pen compartment and two compartments for your smartphone and money, including an integrated key chain. The large inside compartment offers plenty of space for provisions and a change of clothes. FEATURES: - Stable and tip-resistant even when empty - Two side mounts for water bottles, etc. - Flat mesh pocket (ideal for a bike lock) - Foam padding on the sides and bottom - Ideal for use with all ORTLIEB Back-Rollers, Bike-Packers and Velo-Shoppers - Permits access to the inside pocket of your bike pannier

Many e-bike owners are well-acquainted with this problem: bags and baskets that can't be attached to the handlebar because the e-bike display is in the middle of the handlebar. The ORTLIEB E-Bike Mounting Set comes to your assistance without forcing you to relocate the display. The lockable adapter is mounted to the handlebars with the proven cable fastener. This gives you a theft-proof way of attaching your ORTLIEB handlebar bags and baskets despite the display. The fastener is made for attachments of up to 5 kg. - suitable for all handlebar diameters up to 35 mm - duplicate set of keys - mount compatible with products by Rixen&Kaul (KLICKfix System) - bags can be locked to the handlebar with the integrated lock - additional safety in traffic thanks to the reflective material on the mount block

If you have unconventional handlebars (sold separately) but still want a bag with easy access when riding then pick up Ortlieb's Extension Mounting Set for the Ultimate5 handlebar bag (sold separately). It pushes the bag out front further than normal so you can still use your fun hand positions and enjoy the convenience of a handlebar bag.

The integrable mesh inner pocket with zipper for the Handlebar-Pack QR. For all small items, such as wallet, snacks, cell phone or keys.

For all models with the QL2.1 system. Inserts are available for the two upper 16-mm mounting hooks that come with the proven QL2.1 mounting system. The inserts allow you to securely attach your ORTLIEB pannier to virtually any bike rack with smaller tube sizes (16 mm). DETAILS (PER PANNIER): - 1 pair of 8-mm inserts - 1 pair of 10-mm inserts - 1 pair of 12-mm inserts

Ortlieb's Ultimate6 Mounting Set uses an integrated lock to secure your Ultimate6 bag (sold separately) to your bars. Additionally, the lid of the Classic, Plus and Pro models can also be locked. Whether you need one to mount the bag on a different bike or simply want spare parts for a long tour, the mounting set is an indispensable part of the Ultimate6 system.